Primary E-Mail
scott@evdeals.com
Alternate E-mail
ghastly1@yahoo.com
snit33a@verizon.net
smacgregor@aasp.net
Call 508-695-3717
Fax 508-643-0233
ELECTRIC
EVdeals Policies
Battery Tests
Dynamometer Tests
FAQs
Tech
Tips
Performance
Testing
Pictures of Custom Projects
Instructions
Yard Sale
© 1999-2011 EVdeals.com
No part of this site may be reproduced or
transmitted in any form or by any means, electronic or mechanical,
including photo- copying, recording, or by any information storage and
retrieval system
without permission in writing from the publisher.
By appointment only!
Scott MacGregor
Plainville, MA 02762
Phone: (508) 695-3717
Fax: (508) 643-0233
| Half moon chain guide with hardware. Gives more adjustment than stock guide. |
 |
$8.00 |
| NEW! Replacement chain guide & adjuster block. This material is self lubricating, and far more durable than the stock Currie chain adjuster. Your choice of block only, block with machined channel for mounting bolt, or fully machined block. Can be used with USPD kit and all Currie scooters. |
|
Block of .5" Delrin ~1.25 x 1.5" $6 Same block as above, with 1/4"
milled channel Completely
machined block |
| One piece Heavy Duty Chain for all Currie scooters. This chain does NOT have a master link, so you must remove the rear wheel of the scooter to complete the installation. The last chain you'll need! |
 |
$24.00 |
| Heavy Duty Chain and master link for all Currie scooters and bikes. Specify scooter or Pro-Drive. |
 |
$20.00
Spare master link $2.00 |
| Standard Chain and master link for all Currie scooters & bike drives. Specify scooter or Pro-Drive bike. |
|
$17.00 |
| Standard or heavy duty chain spare master link for above. Specify standard or HD in order. |
 |
$2.00 |
| Standard chain "Offset-Link" (also known as a "half link") This special link lets you shorten or lengthen your Currie chain by an "odd" hole count. You will need a master link on both ends of this part. |
 |
$4.00 |
| Standard or heavy duty chain "Single-Link" This special link lets you shorten or lengthen your Currie chain by an "even" hole count. You will need a master link on both ends of this part. Specify standard or HD in order. |
 |
$2.00 |