Primary E-Mail
scott@evdeals.com
Alternate E-mail
ghastly1@yahoo.com
snit33a@verizon.net
smacgregor@aasp.net
Call 508-695-3717
Fax 508-643-0233
ELECTRIC
EVdeals Policies
Battery Tests
Dynamometer Tests
FAQs
Tech
Tips
Performance
Testing
Pictures of Custom Projects
Instructions
Yard Sale
© 1999-2011 EVdeals.com
No part of this site may be reproduced or
transmitted in any form or by any means, electronic or mechanical,
including photo- copying, recording, or by any information storage and
retrieval system
without permission in writing from the publisher.
By appointment only!
Scott MacGregor
Plainville, MA 02762
Phone: (508) 695-3717
Fax: (508) 643-0233
MOTORS
& CONTROLLERS
Bike Motors
(click on your
motor of choice for details)
24V-Modified
Kollmorgen 400W with Dual Chain, 11 tooth USPD adapter
24V-Currie
450W Brush Motor
24V-Kollmorgen
400W (bike, USPD, Pro-Drive)
24V-MAC
600W (bike, USPD, Pro-Drive, Lashout, Rayos)
Scooter Motors
(click
on your motor of choice for details)
24V-
Kollmorgen 400W (Scooter)
24V- MAC/BMC 400W
(Scooter)
24V-Currie
450W Brush Motor
24V-Currie
600W Brush Motor
Bike & Scooter motor controllers
24V-Currie 30A Controller (6 wire throttle)
24V-Currie 30A Controller
(5 wire throttle)
24V-Currie 30A Controller (3 wire throttle)
24V-Currie 40A Controller
(3 wire throttle)
36V-Crystalyte 25A controller and twist throttle package
36V- Currie Style 30A Controller (6 Wire Throttle
Type)
24V- Badsey Hot Scoot
Controller
Throttles
24V-36V Hall and Resistive Types
24V-Currie 30A Controller (6 wire throttle)
Standard 24V, 30A, 6 wire throttle motor controller. Used
on many 350W and 450W
Currie scooters and bikes. $59.00
Twist throttle for above controller (6 pin, LED battery condition ) $54.50
24V-Currie 30A Controller (5 wire throttle)
Standard 24V, 30A, 5 wire throttle motor controller. Used
on many 350W and 450W
Currie scooters and bikes. $59.00
Twist throttle for above controller (5 pin, LED battery condition ) $54.50
24V-Currie
40A
Controller (3
wire throttle)
***Throttle connector for Hall Effect
BRUSH motor only. I can modify to accept old Currie
resistive throttle. Call me if you're unsure
which you need!!
Standard 24V, 40A, 3 wire throttle motor controller. Used
on many 450W and 600W
Currie scooters and bikes. $59.00
Twist throttle for above controller (3 pin, NO LED battery condition ) $54.50
24V-Currie
30A
Controller (3
wire throttle)
***Throttle connector for Hall Effect
BRUSH motor only. I can modify to accept old Currie
resistive throttle. Call me if you're unsure
which you need!!
Standard 24V, 30A, 3 wire
throttle motor controller. Used on many 350W and 450W
Currie scooters and bikes. $59.00
Twist throttle for above controller (3 pin, NO LED battery condition ) $54.50
36V-Crystalyte 25A controller and twist throttle package
36V, 25A brush motor controller and mating twist throttle.
Polarized power input and output
connectors, brake inhibit connector, and 4 pin throttle plug.
Complete kit, $95.00
36V- Currie Style 30A Controller (6 Wire Throttle Type)
Standard 36V, 30A, 6 wire throttle motor controller. Used
on many 600W and 750W
Currie scooters and bikes. $59.00
Twist throttle for above controller (6 pin, LED battery condition ) $54.50
24V-Currie 600W Brush Motor (Scooter)
Upgrade from the wimpy 200 or 450W motor that came with
your new Currie
scooter! This 600W brush type motor will improve hill climbing and overall
performance. It's plug-n-play on all 2004 Currie scooters, and is yours at a
reasonable price.
Motor only $104.99
24V Currie 450W Brush Motor (Scooter)
Upgrade from the wimpy 200W motor that came with
your new Currie
scooter! This 450W brush type motor will improve hill climbing and overall
performance.
Motor only. (Requires controller
& throttle below)
$69.95 + shipping
(90 day warranty)
BACK TO TOP
(CCW rotation)
Kollmorgen 400W - 24V(Scooter)
NOTE: ****For scooters, 15 tooth SPROCKET and CLUTCH bearing installed FREE
NEW! 24V-Modified Kollmorgen 400W with Dual Chain USPD adapter
This is a very special motor assembly.
It's been specifically modified to replace the earliest Currie (MAC/BMC)
USPD motors
which are no longer available. No other modern motors are plug-n-play with this
dual chain drive.
The
motor face has been machined to sit flat against the drive plate like the
original. Rotation has been wired
for clockwise operation. A machined steel adapter has been welded to a new 11
tooth sprocket and pinned
to the motor shaft in the exact position required to engage the primary chain.
Complete modified Kollmorgen motor with adapter $229.00 + shipping OUT OF STOCK
Sprocket, shaft adapter and roll pin only. (your motor faceplate may require milling) $59.00 + shipping
24V-Currie
450W - 24V Brush Motor (Bike)
450W Brushed Currie USPD (Pro-Drive) motor
with rare earth magnets.
This is the same motor
used in the newest Currie USPD bike drive kits.
MOTOR ONLY, (Requires controller & throttle
below) $69.95 +
shipping (8 lbs) (90 day warranty)
Thumb throttle (3 wire) $54.50
Twist throttle (Hall Type) $49.95
*Click here for custom gearing options available!
Kollmorgen 400W - 24V (bike, USPD, Pro-Drive)
MAC 600W - 24V
(bike, USPD, Pro-Drive, Lashout
Electrek, Rayos)
NEW! HIGH
efficiency
600W brushless version.
One of the best kit motors around.
Increased hill climbing ability
and reduced possibility of
overheating all in
a single package.
"Plug-n-Play" installation
on any Currie Pro-Drive bike, USPD kit
system, Lashout,
ElecTrec, and Rayos bikes. Uses Currie/Rayos
style 5k Ohm thumb throttle or Magura 5k full twist motorcycle style
shown below.
Approximate specifications:
Rated output wattage, continuous
600
RPM @ rated wattage (full load)
2535
RPM (no load)
3200
Efficiency (%) @ rated output
83.4
HP @ rated output
0.754
Shaft drive
"D" shaft
Rotation viewed from shaft end
CW
Input Voltage max
24.0
Current @ rated output, Amps
27.1
Diameter of case
5"
Height (face to top)
3.5"
Weight (approx)
6 lbs.
Price $369 +
shipping (6 lbs)
(6 Month Warranty)
IN STOCK!
Thumb throttle (3 wire) $54.50
(24V-36V Hall and Resistive Types)
| 24V -Hard to find 3 wire twist throttle for many newer Currie products. This is a "Hall effect" throttle and can only be used with Currie 3 wire throttle BRUSH MOTOR controllers. |
 |
$49.95 |
| 24V -Hard to find 5 wire twist throttle for many newer Currie products. This is a "Hall effect" throttle and can only be used with Currie BRUSH MOTOR controllers. On/off & battery condition LEDs. 5 wire version. |
 |
$54.95 |
| 24V-36V -Hard to find 6 wire twist throttle for many newer Currie products. This is a "Hall effect" throttle and can only be used with Currie BRUSH MOTOR controllers. On/off & battery condition LEDs. 6 wire version. |
|
$54.95 |
| Thumb Throttle with Cable and Connector (5K) fits all BRUSHLESS MOTOR Currie, Lashout, Rayos, and Electrec products. I can rewire and install a 3 wire connector to match certain newer Hall Effect type Currie scooters and bikes. Call and ask. |
 |
$54.95 |
| Magura Twist Throttle. 63" cable and
pre-installed 3 pin Molex connector.
This is Plug-n-Play for all BRUSHLESS MOTOR
Currie, Lashout, Rayos, and Electrec products! (5K) I can rewire and
install a 3 wire connector to match certain newer Hall Effect type Currie scooters
and bikes. Call and ask.
|
 |
$59.95
|
*Click
here for custom gearing options available!